Revision as of 23:52, 13 September 2017

Project: Arcade RetroPie

Name	Arcade RetroPie
Initiator	Zeno4ever
Status	100%
Skills	Laser Cutter, 3D printer
Summary	Arcade joystick with RetroPie (on Raspberry Pi 3)

Goals

A emulation of the best games of the old retro machines on RetroPie, including Amiga and C64. My main purpose of this page is to direct you to the sources I found on the internet. This wil not be a step for step instruction, use your own brains ;-)

I use a Raspberry Pi 3 as hardware with RetroPie for all the emulation software.

For the case i created my own, you will find here the corner parts and lasercut files. The case is made of 2 mm acrylic plate, to be honest this is to thin to be sturdy enough, so I made the top plate stronger to added a wood 3 mm top plate and add a 'rib' in de middel of the joystick. With this the joystick feels sturdy enough.

Needed parts

Lasercut parts
3D printed corner brackets
RaspberryPi 3 + power supply
Yellow and Black Joystick set from e-bay (incl. USB controller)
16 x M4 short screws for all the panels and 4 x M3 or M4 long (I used 60mm)
4 x rubber feet for under the joystick
optional electronics for controlling the LEDS

Custumizable Corners
Inside of Joystick
LedController
LedController
LedController

Emulations

Practical tips per emulation and where to find the ROMS.

Arcade

I use the default MAME emulation (mame2003) that use 0.78 roms, be sure you use the right ones

MAME 0.78 ROMS part 1 and 2

Amiga

Amiberry
WHDLoad to load games without the emulation GUI
Amiga games?

Tip : You have to put your adf files in the roms/amiga-data/Games_ADF directory and download the files from whdownload, use 'Build amiga games' in the retropie setup menu to build startable games from the selection menu. Warning whit the default setup you can't exit the amiga emulation, this is still on my todo list to solve.

C64

vice

SNES

ROMS Roms from 6666 games

Atari 2600

ROMS Roms from 6666 games

@@ Line 2: / Line 2: @@
 |ProjectName=Arcade RetroPie
 |Owner=Zeno4ever
+|Status=100%
+|Skillz=Laser Cutter, 3D printer
+|Summary=Arcade joystick with RetroPie (on Raspberry Pi 3)
 }}
 =Goals=

Difference between revisions of "Arcade RetroPie"

From