View source for Saleae Logic Analyzer

[[File:Saleae Logic Analyzer.jpg|350px]]

This is a powerful logic analyzer in a very small package .  

Unit is fully over-voltage protected, as well as protected against failures from plugging USB 5V into the unit's ground.

Site [http://support.saleae.com/hc/en-us/sections/200114124-Get-Started-Using-the-Saleae-Logic-Analyzer leverancier]

[https://www.saleae.com/downloads Software download] voor linux, windows en mac. 

* Monitors up to 8 Channels
* Saves up to 10 billion samples
* Multi-Platform; Windows, Mac or Linux
* Export - binary, VCD and CSV
* Analyzer supports: I2C, Async Serial, SPI, 1-Wire, CAN, I2S, PCM, and UNI/O
* Sampling rates up to 24MHz @8 bits
* 9 ultra-flexible test lead set
* 9 E-Z Hook XKM Micro-Hook
* -0.5V to 5.25V operating voltage
* Input low voltage: -0.5 to 0.8V
* Input high voltage: 2 to 5.25V
* 24MHz maximum sample rate
* 200M samples

=Open-source software=
Sigrok PulseView is an open-source linux application that allows using among others the Saleae logic analyzers that we have in the space.

To install the software on Arch linux use the following commands:

<pre>
yaourt -Sy pulseview
yaourt -Sy sigrok-firmware-fx2lafw
yaourt -Sy sigrok-firmware-saleae-logic16
</pre>

The first command installs the Pulseview software, the second command installs the open-source fx2lafw firmware for the Logic8 and the third command installs the binary firmware files needed for using the Logic16.